CCTV Security Indoor Cloud IP Network Camera
Purchase it right away:www.dadu5.com/cctv-security-indoor-cloud-ip-network-camera-1-0-megapixel-720p-onvif-compatible.html
Features:
* Cloud See Technology
* H.264 Video Compression
* 1.0 Megapixel
* Resolution: 1280 x 720P
* 4pcs IR Array Led, 20 meters IR Range
* Build-in IR Cut, Day & Night Monitoring
* Motion detection Alarm, E-mail Alert, Image Masking
* Auto restarting after power off or sudden failure
* Supports network parameters static allocation/DHCP/ADSL
* Remote Real Time Monitoring by IE /Cloud See Client end software/Could See mobile APP
* Plug and Play, no need static IP/DDNS/Port forwarding setting up
* ONVIF Compatible
* Plastic Case, Indoor Use
* Dimension: Approx. 100mm x 100mm x 90mm
Specification:
This Camera How to Work? This cloud see IP camera is more easier to operate than other IP cameras, you do not need to set the static IP/DDNS/port forwarding...
* View on Local PC
Step 1: Please connect well the camera with the router and power supply, then install the CD software "IPClient", enter into the main interface
Step 2: Click "Devices", the available IP Camera will be showed on the left side of "Devices Management"
Step 3: Select the available device, then click ">", put it into the right side of the "Devices Management", the video showed on the PC Client
Step 4: If you want to do any setting, just click the "Settings"
* Remote View on PC via Internet
Step 1: Enter "http://www.nvsip.com" in your browse address bar
Step 2: Login with device ID and connect it. (The device ID is stuck on the camera body and the CD package)
* Remote View by Smart Phone
Step 1: Install the CD mobile phone software to your smart phone, or download a software "Auto ID" from the APP Store, then input the device ID, now you can remote detect by you mobile phone.
* Cloud See Technology
* H.264 Video Compression
* 1.0 Megapixel
* Resolution: 1280 x 720P
* 4pcs IR Array Led, 20 meters IR Range
* Build-in IR Cut, Day & Night Monitoring
* Motion detection Alarm, E-mail Alert, Image Masking
* Auto restarting after power off or sudden failure
* Supports network parameters static allocation/DHCP/ADSL
* Remote Real Time Monitoring by IE /Cloud See Client end software/Could See mobile APP
* Plug and Play, no need static IP/DDNS/Port forwarding setting up
* ONVIF Compatible
* Plastic Case, Indoor Use
* Dimension: Approx. 100mm x 100mm x 90mm
Specification:
| Display | Sensor | 1/4" Omni Vision CMOS |
| Resolution | 1280 x 720 | |
| Compression Standard | H.264 | |
| Frame Rate | 25fps | |
| Bit rate | 128Kbps-8Mbps, adjustable | |
| Sync System | Internal | |
| SNR | 48 dB Min | |
| Illumination | 0 Lux (IR on) | |
| Network Interface Type | RJ45 | |
| Lens | 3.6mm | |
| Focus Type | Manual | |
| Function | White Balance | Auto/Manual |
| AGC | Auto | |
| Motion Detection | Supports | |
| Privacy Shelter | Supports 4 zones | |
| Day/Night Mode | ICR | |
| Dynamic Range | 83.5dB | |
| Video Adjustment | Supports contrast, luminance, saturation, sharpness and lens adjustment |
|
| External Interface | Not support | |
| Detection Alarm | E-mail Alert, client-end alarm | |
| RS-485 Protocol | Not support | |
| Remote Operation | System setting, stream management, storage management, account management and network management |
|
| Network | Ethernet | 10/100M, RJ45 interface |
| Stream | Tri-stream | |
| Network Transmission | Cloud See Network Transmission Protocol Embedded | |
| Network Protocol | Standard HTTP.TCP/IP.ICMP.RTSP.RTP.UDP.RTCP.SMTP. FTP. DHCP.DNS.PPPOE |
|
| General Specification | Working Temperature | -20C - +55C |
| Working Humidity | 10%-90% | |
| Power | DC 12V | |
| Consumption | Day: <4W; Night: <9W |
This Camera How to Work? This cloud see IP camera is more easier to operate than other IP cameras, you do not need to set the static IP/DDNS/port forwarding...
* View on Local PC
Step 1: Please connect well the camera with the router and power supply, then install the CD software "IPClient", enter into the main interface
Step 2: Click "Devices", the available IP Camera will be showed on the left side of "Devices Management"
Step 3: Select the available device, then click ">", put it into the right side of the "Devices Management", the video showed on the PC Client
Step 4: If you want to do any setting, just click the "Settings"
* Remote View on PC via Internet
Step 1: Enter "http://www.nvsip.com" in your browse address bar
Step 2: Login with device ID and connect it. (The device ID is stuck on the camera body and the CD package)
* Remote View by Smart Phone
Step 1: Install the CD mobile phone software to your smart phone, or download a software "Auto ID" from the APP Store, then input the device ID, now you can remote detect by you mobile phone.
